Fireye 65UV5 Flame scanner

The Fireye 65UV5 flame scanner is a microprocessor-based flame scanner utilizing an ultraviolet
tube-type sensor and an electro-mechanical self-checking shutter mechanism.

The Fireye 65UV5 flame scanner incorporates an internal flame relay with a fixed ON/OFF threshold thereby eliminating the need for an external flame amplifier.

The 65UV5 scanner is available with a one-second or four second flame failure response time (FFRT) depending on the model selected. The 65UV5-1004QD-1, -1004EQD versions are one second FFRT, the 65UV5-1004QD versions are four seconds FFRT.

The Fireye 65UV5 flame scanner provides an analogue 4 to 20 mA output referenced to flame signal strength.
The Fireye 65UV5 flame scanner is powered from a 24 Vdc power source provided externally and includes an integral 8 pin quick disconnect connector. A color-coded internal LED indicates flame status and alarm condition. This can be viewed through a viewing port on the rear cover.
The 65UV5 housing has a NEMA 4X / IP66 rating. The unit is suitable for use in Class 1, Div. 2 hazardous environment groups A, B, C & D or Ex II3 G/D Ex nA IIC T4A.
65UV5 CEX models are wired directly via a terminal rail located within the CEX housing. Suitable glands must be used to terminate the cable at the housing.

For a complete system you will need:

59-598 cable

CEX versions need a mounting flange