INDUSTRIAL LTD
© 2026 Lias Industrial | All rights reserved
Phone
+44 (0) 1204 594941
Address
2 John Street, Bromley Cross, Bolton BL7 9BA
Related Products
DURAFire® air atomized No. 2 oil igniter
The DURAFire® air atomized No. 2 oil igniter features the only “protected primary combustion zone” design on the market. As a result this igniter is self stabilized, highly reliable and requires virtually no maintenance. Atomization takes place at the rear of the igniter away from the heat of the tip resulting in no fouling or need for cleaning. Most applications require no igniter retraction reducing installation costs and ongoing maintenance.
The DURAFire® oil igniter delivers the most reliable source of energy for main flame ignition, flame stabilization, and boiler warm-up.
Fuel Types: Light - Medium Oil
Markets Served: All, especially HRSG and Utilities
Product Info
Class 1,2 and 3 ignition source
Capacity from 1.5—9Mw
Air atomised
Patented protected combustion zone
Flame detection with UV scanner
High energy ignition as standard
Complete stainless steel construction
Available in any length
Diameters from 50mm
Near maintenance-free operation
Up to 99% reliable ignition
Part Numbers
-
PDF Manuals
Certificates
-
Specifications
Fuel: | No. 2 oil |
BTU Rating: | 6-30 MBtu/hr |
Atomization Media: | Air |
Fuel Pressure: | 60 psig (at igniter) |
Atomizing Air Pressure: | 80 psig (at igniter) |
Cooling / Combustion Air: | Flow: 60 SCFM (at igniter) Pressure Drop: Approximately 3 in. WC across device |
Length:
| Available in 2 inch increments from 24 to 180 inches (609 to 4572 mm) |
Outside Diameter: | 4” (igniter can be installed in an existing mount tube for a 4” diameter device) |
Material of Construction: | Guide Tube and Mount Tube – Carbon Steel Furnance End of Guide Tube – 304 Stainless Steel Oil Tip Assembly – 304 Stainless Steel |
Retraction Assembly | Per Customer Requirments |
Oil Tip Assembly | Narrow or Wide angle, as required |